About Tire Valve Nozzle

The function of Valve Nozzle:
The main effect of the valve cap is air isolation. It also helps to block dust and debris.

How we should inflate the car tires?
1.After running for a period of time, we stop the car and inflate when the tire dissipates heat. Because the tire temperature will rise when the vehicle is running, and It has an effect on air pressure.
2.Please check the valves nozzle. Because it is inconvenient for us to inflate and measure air pressure if valve and valve core can not match well( it is Protruding recessed or other defect).
3.We need to pay a attention to clean when we inflate. Filled air can’t contain moisture and oil because it can prevent damage to the inner tube rubber.
4.Inflatable shouldn’t exceed the standard barometric pressure, we also can’t inflate and too much inflatable because of long-term travel. Because exceed the standard barometric pressure will lead to tire extension too much . It will reduce strength and the impacts of tire life.
5.Inflatable operation should be careful. We should wipe the dust on the valve before inflating and don’t loose the valve core. We should apply soapy water to the valves after inflating. It can check leads or not. If the leak will produce continuous small bubbles. Then we should screw the valves cap and prevent the sediment from entering the inside of the valve.

They use high-end aviation aluminum encryption processing, they have high strength corrosion resistance and they are light weight.
It isn’t easy to aging, so it is longer life.
Because it is light weight, it doesn’t affect the balance.
It has aesthetics and practicality.

Main material
The washer provides a double guarantee for the air tightness of the valve.
They use high-end aviation aluminum encryption processing, they have high strength corrosion resistance and they are light weight.
Installation Instructions
High- performance tubeless tire valve
1.Deflate the tire and then remove it from the rim
2.Remove the original valve
3.Insert a new valve from the inner side of rim , and then stick it into the correct position
4.Re-installed the tire onto the rim, inflate it to the recommended air pressure value.