Business For Tire regrooving machine

 

On October 19, 2020, a customer came to Peru and asked about the Tire regrooving machine . The customer wanted a sample and asked to send it to the agent address in Jiangsu. We will quote the customer and the freight price according to the customer's request. After the quotation, the customer said to consider it. After two days, the customer asked the parameters of the engraving machine.

 

Voltage: 220V / 50HZ

Dimensions: 230 * 100 * 102mm

Tool holder size: 200 * 38mm

Movement mode: manual

Power: 350W

Carving pattern: U-shaped V-shaped

 

Product instructions

1. Check whether the power supply meets the standard voltage of this machine 220V.
2. Please place the machine on a stable place.
3. Turn on the power of the host, adjust the current speed to half, and see if the work indicator is on. The voltage gear is adjusted to the third gear or the fourth gear (the average gear is third gear).
4. The blade is not suitable for dry burning (the blade should not be exposed to burn red during use, otherwise the blade may be damaged), that is, the depth of the carving is the same as that of the exposed part of the fixed knife.
5. When installing the blade, the copper heads of the two clamping blades are not allowed to be linked.
6. When operating the machine, hold the handle and press down on the front blade position. The blade will burn red in about three to five seconds, that is, power on. It is recommended not to dry it for a long time, otherwise the blade will break easily.
7. When working, during the rubber cutting process, do not push forward too hard, and push forward evenly. At this time, you can adjust the suitable voltage and temperature gears according to your usage. Normally, it is not recommended to adjust to the maximum value. When working, the handle link line will dissipate heat, which will not affect normal use.

 

Precautions:

(1) When unplugging the plug, be sure to hold the plug, do not pull it by the power cord.

(2) Do not place heavy objects on the power supply, and do not allow the power cord to be squeezed.

(3) If the power cord is damaged, in order to avoid danger, it must be replaced by a professional person from the manufacturer or its maintenance department or similar.

(4) Do not use wet hands to plug or unplug the power plug to avoid plugging or unplugging the power plug.

(5) Do not plug or unplug the power plug in a place where there is a gas leak.

(6) Use a standard and reliable AC grounding socket.

 

The transaction with the customer went very smoothly, mainly because the customer is very interested in the engraving machine, and he is also an old customer, who has always trusted us and has a fixed purchase time and plan every year. The quotation this time is very close to the customer's expected price, and we can have further negotiations and cooperation with the customer. Therefore, we need to understand customer needs through dialogue with customers to help customers solve problems. Finally, the order is obtained through price negotiation