How to deal with slow leaks
Many people have experienced this situation. They just filled the tires before going out. After riding for a while on the road, they found that the tires were out of gas. This kind of bicycle jogging is very common, especially at lower temperatures.
Under the circumstances, how can we prevent the bicycle valve core from running slowly?
In winter, the temperature is relatively low, and the synthetic rubber valve ribs become very hard and brittle at low temperatures, and its performance is lowered, the sealing property is deteriorated, and the sealing of the gas in the tire tire is greatly reduced. In order to prevent the bicycle valve core from leaking slowly, you can use the fabric to sew a valve mouth cover yourself. When the temperature drops, you can put it on the valve, which can prevent the valve core and valve to a large extent. The ribs were damaged by freezing. When you need to inflate the tire, you can take the mouthpiece down, then pull out the valve core and apply a layer of glue on it, but you need to be careful not to block the air inlet, then you can hold the glue When you are still wet, put the valve ribs on. After such processing, there will be no slow-leaking situation. This method can be used all year round, but it works best in winter.
