Maintenance of automobile tires starts from tire valve

Maintenance of automobile tires starts from tire valve

The maintenance of automobile tires starts from the tire valve. We cannot ignore the valve during the maintenance. What should we do? Shengshi Weiye automobile valve manufacturers to introduce you below.
When it comes to the safety of automotive tires, we tend to overlook a very important thing - the tire valve. The tire valve is the only place where the tire can be inflated, and it is mounted on the hub. Since it is so important, what are the problems with tire valves? How to solve it? How should I avoid it?
 There are two kinds of tire valve problems:

First, the valve needle inside the valve is rusted due to aging, or is mixed with impurities, causing the valve needle to return abnormally, and then leaking;

Second, the valve is damaged by aging, or the valve is The place where the hub comes in contact with is caused by inclusion of foreign matter, which causes air leakage.
The key things inside the valve - valve needles, carts, dollies, electric cars, bicycles, toy cars are the same. The yellow arrow points to the seal inside the valve needle and valve. The red arrow refers to the valve needle's own seal. The most problematic point is that the slightest contamination of the needle will result in a tight seal. Before the general inflation, you should first click the valve needle so that it blows out the dirt. Concerned about car safety, but have you ever paid attention to tire valves?

How can we prevent these problems? There are three solutions: (1) The valve needle must be inspected every time the inflator is inspected to see if the valve needle is leaking. If there is a leak, replace the valve needle and the number of valve caps is not small. (2) Each maintenance or When inflating, you should take a look at the valve and look at the degree of rubber aging. There are not many cracks. (3) After replacing the “iron” valve with the best quality, there will be no air leakage after tightening.

And we know that the most common car valve is still rubber. In general, there will be no problem for three to five years. Don't worry. However, if your parking environment is not good, for example, the sun can always be exposed to the valve or it can always be exposed to muddy water or other corrosive things, it will often reduce its useful life. Because the valve is inconspicuous and its service life is a bit longer, people tend to ignore it.
点击图标下载 App