Many people have experienced this situation. They just filled the tires before going out. After riding for a while on the road, they found that the tires were out of gas. This kind of bicycle jogging is very common, especially at lower temperatures. Under the circumstances, how can we prevent ...

warranty period Shengshi Weiye valve product quality meets or exceeds Chinese national standards. During the use of the product you purchased, if the product is not working properly due to the quality problem of the product within the normal service life, you can get free repairs at Shengshi Wei...

What should I do if the car valve leaks When the tire pressure is too high, the contact area between the tire and the ground is small, and the car accelerates, leaving a part of the tire on the ground, and then returning to the ground, it will be deformed due to acceleration, thus showing fluctu...

From Shengshiweiye, China Replacing a tire valve stem. A valve stem is a self-contained valve which opens to admit gas to a chamber (such as air to inflate a tire), and is then automatically closed and kept sealed by the pressure in the chamber, or a spring, or both, to prevent the gas from esc...

These factors affect the effectiveness of valve production Although the number and types of valves in the current market are very large, they can bring very good results to users, but under the influence of market competition, not all types of products have a good effect. Mainly because many fac...

With the vigorous development of China's industrialization, China's tire valve market development has shown a leap forward development, whether it is car tires or bicycles or electric car tires need to use the valve, it can be said that there is a place where the car needs a valve The existence o...

As domestic technology becomes more and more developed, there are more and more cars. In today's market, the demand for valves has gradually increased. With the rapid development of the automotive industry, the demand for valves has gradually increased. Although the shape of the valve TR48E is re...

How to repair the inner tube valve? In the process of using the inner tube valve, there may be problems with the valve and it needs to be repaired. In order to ensure that the valve after the repair can be used normally, you need to follow the steps below to repair the valve. :   When...

Inner tube valve replacement problem Once the inner tube tire valve in the process of use has serious skin lesions, or some bad problems that are not easy to repair, in order to restore the valve to normal use, you need to replace the new valve. And in order to ensure that the replacement of the...

Tire Valve Stem Caps - Do Your Tires Need Them? Have you ever gone to check your vehicle's tire air pressure and found the cap that screws on the valve stem was missing on one or more tires? You may have thought you were lucky because you had easy access to the valve stem, thereby making it easi...

Tubeless Rubber Snap-In Valves TPMS Rubber Snap-In Tubeless rubber snap-in valves allow a maximum cold tire inflation pressure of 65 psi and are designed for passenger car, light-duty trailer and light truck applications, as well as are suitable for use in autocross competition. Rubber snap-in ...

Introduction of Snap-in tubeless rubber tire valves The function of tire valves is to inflate and deflate the tire. It can help maintain the seal of tire after it's inflated. It usually consists of core and cap. Installation method  1.Remove valve core, deflation 2.Separate ti...