As domestic technology becomes more and more developed, there are more and more cars. In today's market, the demand for valves has gradually increased. With the rapid development of the automotive industry, the demand for valves has gradually increased. Although the shape of the valve TR48E is re...

How to repair the inner tube valve? In the process of using the inner tube valve, there may be problems with the valve and it needs to be repaired. In order to ensure that the valve after the repair can be used normally, you need to follow the steps below to repair the valve. :   When...

Inner tube valve replacement problem Once the inner tube tire valve in the process of use has serious skin lesions, or some bad problems that are not easy to repair, in order to restore the valve to normal use, you need to replace the new valve. And in order to ensure that the replacement of the...

Tire Valve Stem Caps - Do Your Tires Need Them? Have you ever gone to check your vehicle's tire air pressure and found the cap that screws on the valve stem was missing on one or more tires? You may have thought you were lucky because you had easy access to the valve stem, thereby making it easi...

Tubeless Rubber Snap-In Valves TPMS Rubber Snap-In Tubeless rubber snap-in valves allow a maximum cold tire inflation pressure of 65 psi and are designed for passenger car, light-duty trailer and light truck applications, as well as are suitable for use in autocross competition. Rubber snap-in ...

Introduction of Snap-in tubeless rubber tire valves The function of tire valves is to inflate and deflate the tire. It can help maintain the seal of tire after it's inflated. It usually consists of core and cap. Installation method  1.Remove valve core, deflation 2.Separate ti...

How to do the daily inspection of the tire valve Since the valve is affected by various external factors during use, and the device itself has a specific service life, there is a possibility of malfunction, and once the device has a problem, it will affect the normal use of the tire. As well as ...

Valve design and requirements in the design In order to meet the different needs of different vehicles, there are many types of valve, such as snap-type valves, explosion-proof valves, etc., are the more common valve products on the market. From modern valves, many are one-way valves that can be...

Introduction to the tire valve Function:The function of tire valves is to deflate and inflate the tire to ensure valve sealing. Feature: High-density aluminum as the material. The seal rings of tire valves are produced by high-quality EPDM rubber,High temperature resistance, anti-aging, good sea...

Replacement and inspection of valve nozzles Replace valve nozzles in the following situations: Replace new tires with new valve nozzles   the valve nozzle is found to be aged, and it is recommended to replace the valve nozzle when cracking.   the rubber of the valv...

Car tire valve leakage solution Tire Valve Leakage: 1. Check if the valve is leaking. You can wipe the water on the valve core to check if there is a “beep” sound or a continuous small bubble. 2. Check the valve before inflating. If the valve is not well matched with the valve core, there is u...

 Installation of tubeless tires operation guide 1 Make sure the rim is tight on the hydraulic clamp. 2 Apply lubricant to both the rim and the tire. 3 Snap the pliers to the highest point on the outside of the rim of the rim. 4 Place the tire on the support platen, lower the position be...