What should I do if the car valve leaks
What should I do if the car valve leaks
When the tire pressure is too high, the contact area between the tire and the ground is small, and the car accelerates, leaving a part of the tire on the ground, and then returning to the ground, it will be deformed due to acceleration, thus showing fluctuations.
1. The steering wheel is difficult to control during driving, and the deviation is:
When the tire pressure is too high, the contact area between the tire and the ground is small, and the car accelerates, leaving a part of the tire on the ground, and then returning to the ground, it will be deformed due to acceleration, thus showing fluctuations. In this way, not only the tire resistance increases, but also affects the acceleration performance of the car, and the steering wheel is shaken and deflected. When the air pressure is too high, when encountering sharp objects such as nails and glass on the road surface, it is easy to get into the tire and even cause a puncture.
2. Water surface sliding phenomenon:
When the car is driving on a heavy rainy day, when the tire pressure is too low, the car is like floating on the water surface, and the rotation on the water surface is correspondingly reduced. This situation often occurs in cars with serious tire wear due to long-term use. When this happens, the steering wheel and brakes are almost completely ineffective, and the car is prone to side-slip running and causing an accident. If you panic and step on the brakes at this time, it is very dangerous. The correct approach should be to hold the steering wheel with both hands and gently brake to reduce the speed.
3. Check if the valve is leaking. You can wipe the water on the valve core to check if it leaks, or you can see continuous small bubbles. Pay attention to the valve before inflating. If the valve does not fit well with the valve core, it has unevenness and is not easy to inflate. If the valve and valve core are well matched, the valve should be cleaned and the valve and valve core should be fixed and not loose. The inflation should be appropriate, the tire pressure should not be too high, and the tire pressure is too high, the cord will be excessively stretched, resulting in a decrease in strength and affecting the life of the tire. The air that is filled must not contain moisture and other impurities to prevent deterioration or damage to the tire rubber. When the car has just stopped, do not inflate, because the temperature of the gas inside the tire is higher, the tire pressure is too high, and the tire should be inflated after the heat is dissipated.
4. The tire groove is worn out:
Never change the spare tire on uneven roads or on ramps. When disassembling the tire, place the tire stopper on the outside of the tire at the diagonal position of the replaced tire to prevent the car from moving. Hang up the handle and pull the hand brake. Use the wheel screw wrench to turn the screw to the left for about one-half turn, use the jack to lift the car up, confirm the correct position of the jack, and then replace the tire. Lock the screw nut and the screw, and put down the tire to land, then press the screw in the diagonal form to further tighten. After changing the tire, check if the air pressure of the tire is balanced.
Established in Hebei in 2003, Shengshi Weiye Valves is now one of the major manufacturers of valve manufacturing in the world.
